Verified 1z0-1086-22 Exam Dumps PDF [2023] Access using Prep4sureExam
Try Best 1z0-1086-22 Exam Questions from Training Expert Prep4sureExam
Oracle 1z0-1086-22 exam is designed for professionals who want to demonstrate their expertise in implementing Oracle Enterprise Data Management Cloud solutions. Oracle Enterprise Data Management Cloud 2022 Implementation Professional certification exam is intended for individuals who have experience with Oracle EPM Cloud and Oracle ERP Cloud solutions. 1z0-1086-22 exam covers a wide range of topics, including data management, master data management, data governance, and data integration. Passing 1z0-1086-22 exam is a great way for professionals to showcase their skills and expertise in this area and to differentiate themselves from other candidates in the job market.
Oracle 1z0-1086-22 exam covers a range of topics, including deploying and managing data management cloud services, creating and managing data models, configuring data governance and security, and performing data integrations with other systems. Candidates are required to have hands-on experience with Oracle Cloud EPM solutions and a solid understanding of data management concepts and best practices. Passing 1z0-1086-22 exam is an excellent way for professionals to demonstrate their expertise in Oracle Cloud data management and enhance their career prospects in this field.
NEW QUESTION # 16
A request was submitted that triggered an approval policy. However, there are not enough approvers available to satisfy the terms of the policy.
What are two resolutions?
- A. After exceeding the defined number of approval notifications, the request is pushed back to the original submitter and must be submitted and approved again.
- B. The request is escalated to an application owner, who changes the approval policy to require fewer approvers, at which point the request is committed.
- C. The request is escalated to a data manager, who grants an exceptional approval and commits the request.
- D. The request is closed after exceeding the defined number of approval notifications and cannot be committed.
Answer: B,C
Explanation:
1. The request is escalated to a data manager, who grants an exceptional approval and commits the request: This option is correct because when there are not enough approvers available to satisfy the terms of the approval policy, the request is escalated to a data manager after exceeding the defined number of approval notifications. The data manager can then grant an exceptional approval and commit the request.
2. The request is escalated to an application owner, who changes the approval policy to require fewer approvers, at which point the request is committed: This option is correct because when there are not enough approvers available to satisfy the terms of the approval policy, the request is escalated to an application owner after exceeding the defined number of approval notifications. The application owner can then change the approval policy to require fewer approvers, and then approve and commit the request.
Reference:
https://docs.oracle.com/en/cloud/saas/enterprise-data-management-cloud/edmra/approving-and-enriching-requests.html
NEW QUESTION # 17
Which statement is FALSE about unbound dimensions?
- A. You can load data into unbound dimension viewpoints by using request load files.
- B. You can extract data from unbound dimensions using extracts.
- C. You can use unbound dimensions to manage complex data sets such as related value sets, account combinations, and multi-dimensional mappings.
- D. Unbound dimensions are created as part of the application registration process, but do not get imported or exported.
Answer: D
Explanation:
Explanation
Unbound dimensions are created outside of the application registration process and do not get imported or exported. You can use unbound dimensions to manage complex data sets such as related value sets, account combinations, and multi-dimensional mappings in Oracle Enterprise Data Management Cloud. You can extract data from unbound dimensions using extracts and load data into unbound dimension viewpoints by using request load files. You cannot use unbound dimensions for importing and exporting data, because they are not bound to any external applications. References: Working with Unbound Dimensions - Oracle Help Center
NEW QUESTION # 18
In a maintenance view for mappings, you compare the source and mapping viewpoints to identify nodes that exist in the source but have not been mapped to the target.
What is the next step to define mappings?
- A. Create a request, then drag and drop nodes from the source to the mapping viewpoint.
- B. Open a request, add nodes to the target viewpoint, and assign the mapping key to the new nodes.
- C. Using the appropriate mapping key, import an Excel mapping file.
- D. Run the mapping utility to relate source to target nodes.
Answer: A
Explanation:
In a maintenance view for mappings, you can compare the source and mapping viewpoints to identify nodes that exist in the source but have not been mapped to the target. The next step to define mappings is to create a request, then drag and drop nodes from the source to the mapping viewpoint. This way, you can create new nodes in the mapping viewpoint that have properties derived or transformed from the source nodes using the node type converter and map binding. You do not need to use an Excel mapping file, run a mapping utility, or open a request and add nodes to the target viewpoint, because these are not supported methods for defining mappings in Oracle Enterprise Data Management Cloud. Reference: Working with Requests - Oracle Help Center3; Creating Mapping Viewpoints - Oracle Help Center2
NEW QUESTION # 19
You have account dimensions in two different applications that must be kept in sync.
Given a business requirement that nodes added to either application must be shared with the other, what should you do?
- A. Create one bi-directional node type converter between the two applications.
- B. Create one node type converter with Application! accounts as the source and Application2 accounts as the target, and specify a reverse conversion in requests when sharing in the opposite direction.
- C. Create two node type converters: one with Application 1 accounts as the source and Application2 accounts as the target, and another with Application2 accounts as the source and Application 1 accounts as the target.
- D. Create three node type converters: one with Application! accounts as the source and Application2 accounts as the target, another with Application2 accounts as the source and Application! accounts as the target, and a third for bi-directional sharing.
Answer: C
Explanation:
According to the reference, "A node type converter is a data object that enables you to share nodes between different node types in different applications." To keep account dimensions in sync between two applications, you need to create two node type converters, one for each direction of sharing. You cannot create a bi-directional node type converter, or specify a reverse conversion in requests.
To keep account dimensions in two different applications in sync and share nodes added to either application with the other, you can create two node type converters. One node type converter can have application 1 accounts as the source and application 2 accounts as the target, and the other node type converter can have application 2 accounts as the source and application 1 accounts as the target. This will ensure that nodes added to either application are shared with the other. (Reference: Oracle Enterprise Data Management Cloud 2022 Implementation Essentials, Module 3)
NEW QUESTION # 20
Which two statements are true about requests?
- A. You can perform data changes across multiple views and submit all those changes together in the same request.
- B. When you create a request, data changes are not applied immediately.
- C. Requests are the mechanism that you use to apply changes to data.
- D. You cannot make multiple changes to the same node in the same request.
Answer: B,C
Explanation:
1. Requests are the mechanism that you use to apply changes to data: This option is correct because requests are the way that you make changes to enterprise data in Enterprise Data Management Cloud. Requests can contain various types of data changes, such as adding, deleting, or editing nodes or properties.
2. When you create a request, data changes are not applied immediately: This option is correct because when you create a request, the data changes are not applied to the viewpoints until the request is submitted and approved. You can review and modify the request items before submitting them.
Reference:
https://docs.oracle.com/en/cloud/saas/enterprise-data-management-cloud/edmra/working-with-requests.html
NEW QUESTION # 21
Which three statements are true about lookup sets7
- A. Lookup sets associate source values, or keys, with target values.
- B. Keys and values in a lookup set can be configured for one or more applications.
- C. You can use lookup sets to group and filter nodes.
- D. Lookup sets are created during application registration.
- E. You use lookup sets in expressions for deriving properties or transforming properties in node type converters.
Answer: A,B,E
Explanation:
Explanation
Lookup sets are used to associate source values, or keys, with target values that can be used in expressions for deriving properties or transforming properties in node type converters. You can configure keys and values in a lookup set for one or more applications. Lookup sets are not created during application registration, but rather as separate objects that can be shared acrossapplications. Lookup sets are not used to group and filter nodes, but rather to map values between different applications or perspectives. References: Working with Lookup Sets - Oracle Help Center2
NEW QUESTION # 22
Which two statements are true about Inherited properties7
- A. Values are inherited from the top node.
- B. Different values can be inherited for shared nodes under multiple parents.
- C. Nodes in lists can inherit property values from their ancestors.
- D. Inheritance can be overridden at lower levels; descendants from the overriding position inherit the override value.
Answer: A,D
Explanation:
Explanation
Inherited properties are properties that are inherited from ancestor nodes in a hierarchy. The following statements are true about inherited properties: inheritance can be overridden at lower levels; descendants from the overriding position inherit the override value; different values can be inherited for shared nodes under multiple parents; values are inherited from the top node. The following statement is false about inherited properties: nodes in lists can inherit property values from their ancestors. Nodes in lists cannot inherit property values from their ancestors, because lists do not have parent-child relationships or hierarchies. References:
Working with Properties - Oracle Help Center
NEW QUESTION # 23
Which three statements are true about an alternate viewpoint in an unbound state7
- A. The alternate viewpoint is not used in a binding and all of the data chain objects that it contains have a binding status of Unbound.
- B. The alternate viewpoint may be partially bound if it shares data chain objects with a bound viewpoint.
- C. You cannot use the alternate viewpoint to construct a what-if scenario that is isolated from production.
- D. Unbound data objects in an alternate viewpoint enable you to model and evaluate potential changes to dimensions in cases where the changes would not conform to a dimension's current binding rules.
- E. The alternate viewpoint is not used in a binding, but all of the data chain objects that it contains have a binding status of Bound.
Answer: A,D
Explanation:
"An alternate viewpoint is a data object that enables you to create an alternate version of a bound viewpoint that is not used in a binding. All of the data chain objects that it contains have a binding status of Unbound." and "Unbound data objects in an alternate viewpoint enable you to model and evaluate potential changes to dimensions in cases where the changes would not conform to a dimension's current binding rules." The other statements are false. The alternate viewpoint is not used in a binding, but all of the data chain objects that it contains have a binding status of Bound. You can use the alternate viewpoint to construct a what-if scenario that is isolated from production. The alternate viewpoint cannot be partially bound if it shares data chain objects with a bound viewpoint.
NEW QUESTION # 24
What are two scenarios where mapping nodes across applications are required7
- A. When applications share an external connection
- B. When applications share common dimensions but use different granularity
- C. When applications have common dimensions but use different prefixes or suffixes for member names
- D. When applications share data but have different dimensions
Answer: B,D
Explanation:
Explanation
Mapping nodes across applications are required when applications share data but have different dimensions or different granularity. For example, if a source application has a product dimension with four levels and a target application has a product dimension with three levels, you need to map the nodes from the source to the target to determine how the data will be aggregated or disaggregated. Similarly, if a source application has a monthly time dimension and a target application has a quarterly time dimension, you need to map the nodes from the source to the target to determine how the data will be summed or averaged. Mapping nodes across applications are not required when applications have common dimensions but usedifferent prefixes or suffixes for member names, because this can be handled by node type converters or property derivations. Mapping nodes across applications are not required when applications share an external connection, because this does not affect the dimensionality or granularity of the data. References: Creating Mapping Viewpoints - Oracle Help Center1; Working with Node Type Converters - Oracle Help Center
NEW QUESTION # 25
Which two items describe the information that you can find in the Custom Validation Report?
- A. A list of system and application-specific validations
- B. The date and status of the last time a validation was run
- C. A list of all manually created validations across all applications
- D. The actions and properties that trigger the validation check
Answer: A,D
Explanation:
Explanation
The Custom Validation Report is a report that lists all the custom validations that have been created for an application. The report includes information such as: the actions and properties that trigger the validation check, the validation rule expression and message, the node types and hierarchy sets that use the validation, and whether the validation is enabled or disabled. The report does not include a list of all manually created validations across all applications, because it is specific to one application at a time. The report does not include a list of system and application-specific validations, because these are predefined validations that cannot be customized. The report does not include the date and status of the last time a validation was run, because this information is available in the request history or subscription history. References: Working with Custom Validations - Oracle Help Center
NEW QUESTION # 26
A request you submitted has been pushed back to you. One of the approvers has enriched the request with an action that your data access does not enable you to perform.
What happens when you submit the request again?
- A. The enriched item creates a validation error but can still be submitted with the rest of the request for approval.
- B. All items in the request are validated using your data access except the enriched item, which is validated during the approval phase using the enricher's data access.
- C. The enriched item creates a validation error and must be deleted from the request inspector before you can submit the request for approval.
- D. The enriched item is validated using the enricher's data access ancTtan be submitted along with the rest of the request.
Answer: B
Explanation:
All items in the request are validated using your data access except the enriched item, which is validated during the approval phase using the enricher's data access: This option is correct because when a request is pushed back to the submitter, the enriched item is preserved and validated using the enricher's data access during the approval phase. The rest of the items are validated using the submitter's data access when the request is submitted again.
Reference:
https://docs.oracle.com/en/cloud/saas/enterprise-data-management-cloud/edmra/approving-and-enriching-requests.html
NEW QUESTION # 27
A request you submitted has been pushed back to you. One of the approvers has enriched the request with an action that your data access does not enable you to perform.
What happens when you submit the request again?
- A. The enriched item creates a validation error but can still be submitted with the rest of the request for approval.
- B. All items in the request are validated using your data access except the enriched item, which is validated during the approval phase using the enricher's data access.
- C. The enriched item creates a validation error and must be deleted from the request inspector before you can submit the request for approval.
- D. The enriched item is validated using the enricher's data access ancTtan be submitted along with the rest of the request.
Answer: B
Explanation:
Explanation
All items in the request are validated using your data access except the enriched item, which is validated during the approval phase using the enricher's data access: This option is correct because when a request is pushed back to the submitter, the enriched item is preserved and validated using the enricher's data access during the approval phase. The rest of the items are validated using the submitter's data access when the request is submitted again.
References:
* https://docs.oracle.com/en/cloud/saas/enterprise-data-management-cloud/edmra/approving-and-enriching-r
NEW QUESTION # 28
You define an approval policy at the dimension level.
What statement correctly describes how this approval policy interacts with related data chain objects?
- A. The approval policy applies to the node types and hierarchy sets in the dimension.
- B. The approval policy applies to only the dimension and does not apply to related data chain objects.
- C. The approval policy applies to hierarchy sets but not node sets in the dimension.
- D. The approval policy cascades down to only the data chain objects specified in the policy definition.
Answer: A
Explanation:
* This option is correct because when you define an approval policy at the dimension level, it applies to all the node types and hierarchy sets that belong to the dimension. You can also define approval policies at the node type or hierarchy set level to override the dimension level policy.
NEW QUESTION # 29
Which two statements are true about hierarchy sets?
- A. You can manage multiple hierarchies in a single hierarchy set.
- B. Shared nodes exist when the same node type is used in multiple hierarchy sets.
- C. Hierarchy sets store the parent-child relationships between nodes of node types defined for a dimension.
- D. Hierarchy sets are always a component of a viewpoint's data chain.
Answer: A,C
Explanation:
Comprehensive Explanation: According to the reference, "Hierarchy sets store the parent-child relationships between nodes of node types defined for a dimension. You can manage multiple hierarchies in a single hierarchy set." The other statements are false. Hierarchy sets are not always a component of a viewpoint's data chain, but only when they are selected as a data object for the viewpoint. Shared nodes exist when the same node is used in multiple hierarchy sets, not when the same node type is used.
NEW QUESTION # 30
In your application, you have nodes for cost centers. You want to group them two ways: by department and geography.
What are two ways to accomplish this?
- A. Create two node sets; one with a group of departments and another with a group of geographical regions.
- B. Create a list viewpoint for cost centers, then add parents for departments and geography.
- C. Create two hierarchy sets; one where parent nodes are departments and child nodes are cost centers; and another where parent nodes are geographical regions and child nodes are cost centers.
- D. Create one hierarchy set with different top nodes for departments and geography, and add shared cost center nodes as children.
Answer: C,D
Explanation:
Explanation
Hierarchy sets define nodes' parent-child relationships. You can use hierarchy sets to organize nodes into different hierarchies based on business needs or perspectives. One way to group cost centers by department and geography is to create two hierarchy sets; one where parent nodes are departments and child nodes are cost centers; and another where parent nodes are geographical regions and child nodes are cost centers.
Another way is to create one hierarchy set with different top nodes for departments and geography, and add shared cost center nodes as children. Shared nodes allow the same nodes to exist multiple times in the hierarchy set. You cannot use a list viewpoint or node sets to group cost centers by department and geography, because they do not define parent-child relationships or hierarchies. References: Working with Hierarchy Sets
- Oracle Help Center
NEW QUESTION # 31
The Owner permission for an application lets users perform which three tasks?
- A. Import viewpoints from external applications.
- B. Delete service administrators from an instance.
- C. Assign permissions for an application's data objects to other users and groups.
- D. Manage an application's data objects.
- E. Modify application registration.
Answer: C,D,E
Explanation:
Explanation
The Owner permission is the highest level of permission that can be assigned to an application. Users with the Owner permission can perform various tasks such as: modify application registration, assign permissions for an application's data objects to other users and groups, manage an application's data objects such as properties, views, node types, node sets, hierarchy sets, etc., create and delete applications, and link dimensions across applications. Users with the Owner permission cannot import viewpoints from external applications, because viewpoints are created within Oracle Enterprise Data Management Cloud and are not imported from external applications. Users with the Owner permission cannot delete service administrators from an instance, because service administrators are created and managed in Oracle Cloud EPM through My Services by the Identity Domain Administrator. References: Working with Permissions - Oracle Help Center1; Registering Applications - Oracle Help Center
NEW QUESTION # 32
You have entity information in your default view for your planning application, but you also want that entity information to be accessible in another view.
Which method can you use to accomplish this?
- A. Identify the view used by the entity dimension, create a different view, and then point to the default view.
- B. Identify the node set used by the entity dimension, create a viewpoint in a different view, and then point to that same node set.
- C. Copy the default view, create a request, and run a validation.
- D. Identify the viewpoint used by the entity dimension, create a viewpoint in a different view, and then point to the original viewpoint.
Answer: D
Explanation:
"You can reuse viewpoints across views by pointing to an existing viewpoint when you create a new viewpoint." This way, you can access the entity information in another view without duplicating data objects.
NEW QUESTION # 33
Which two items describe the information that you can find in the Custom Validation Report?
- A. A list of system and application-specific validations
- B. The date and status of the last time a validation was run
- C. A list of all manually created validations across all applications
- D. The actions and properties that trigger the validation check
Answer: A,D
Explanation:
Explanation
The Custom Validation Report is a report that lists all the custom validations that have been created for an application. The report includes information such as: the actions and properties that trigger the validation check, the validation rule expression and message, the node types and hierarchy sets that use the validation, and whether the validation is enabled or disabled. The report does not include a list of all manually created validations across all applications, because it is specific to one application at a time. The report does not include a list of system and application-specific validations, because these are predefined validations that cannot be customized. The report does not include the date and status of the last time a validation was run, because this information is available in the request history or subscription history. References: Working with Custom Validations - Oracle Help Center
NEW QUESTION # 34
Which two statements are true about the Participant permission?
- A. Granting the Participant (Read) permission at the application level lets users browse viewpoints that contain data for any dimension in the application.
- B. You can assign the Participant permission at the application, dimension, hierarchy set, node type, and property level.
- C. The Participant permission enables you to specify which actions users can take and which properties they can view or edit for node types and hierarchy sets.
- D. When you grant a user Participant (Write) permission on a hierarchy set, that user is also granted implicit Participant (Write) permission on any node type in that hierarchy set.
Answer: C,D
Explanation:
"When you grant a user Participant (Write) permission on a hierarchy set, that user is also granted implicit Participant (Write) permission on any node type in that hierarchy set." and "The Participant permission enables you to specify which actions users can take and which properties they can view or edit for node types and hierarchy sets." The other statements are false. Granting the Participant (Read) permission at the application level does not let users browse viewpoints that contain data for any dimension in the application, but only lets them browse viewpoints that contain data for dimensions where they have been granted explicit permissions. You cannot assign the Participant permission at the property level.
NEW QUESTION # 35
You are mapping nodes from dimensions in two source applications to a dimension in a single target application.
How do you set up the mapping hierarchy sets?
- A. Target nodes and converted source nodes in two separate hierarchies
- B. Target nodes as parents and converted source nodes as children
- C. Target nodes in one hierarchy set and converted source nodes in a separate hierarchy set
- D. Separate hierarchy sets for each source-to-target relationship
Answer: D
Explanation:
When you are mapping nodes from dimensions in two source applications to a dimension in a single target application, you need to set up separate hierarchy sets for each source-to-target relationship. This way, you can define the mapping rules and node type converters for each source node type and target node type pair. You cannot use target nodes and converted source nodes in two separate hierarchies, because this would not establish a mapping relationship between them. You cannot use target nodes in one hierarchy set and converted source nodes in a separate hierarchy set, because this would not allow you to export the mappings to the target application. You cannot use target nodes as parents and converted source nodes as children, because this would create a hierarchical relationship instead of a mapping relationship. Reference: Working with Hierarchy Sets - Oracle Help Center1; Creating Mapping Viewpoints - Oracle Help Center2
NEW QUESTION # 36
Consider a hierarchy: A parent node, "Core Products", has a child node "100", which has children "101" and
"102". In the same hierarchy, you insert "100" under another parent, "New Products".
What happens?
- A. Node "100" and its children are inserted as shared nodes under "New Products".
- B. Node "100" is inserted as a unique node under "New Products", with a qualifier to indicate that it's a separate node from the original.
- C. Only node "100" is inserted as a shared node under "New Products".
- D. Node "100" cannot be inserted under another parent in the same hierarchy.
Answer: A
NEW QUESTION # 37
Which task is NOT part of the Enterprise Data Management process?
- A. Sharing, mapping, synchronizing, and governing data across registered applications
- B. Creating views and viewpoints to configure custom validations to enforce business rules on your data
- C. Creating ad-hoc reports to inspect node locations, properties, and history
- D. Using views to work with your data, and requests to modify your data
- E. Creating views and viewpoints to manage alternate business perspectives
Answer: B
Explanation:
* Creating views and viewpoints to configure custom validations to enforce business rules on your data: This option is not correct because creating views and viewpoints is not a task that involves configuring custom validations. Custom validations are configured at the node type level by defining validation rules and expressions that enforce business rules on your data.
NEW QUESTION # 38
In what order do you archive data chain objects?
- A. Viewpoint, dimension, application
- B. Node type, hierarchy set, node set, viewpoint
- C. Application, dimension, viewpoint
- D. Viewpoint, node set, hierarchy set, node type
- E. You can archive data chain objects in any order
Answer: B
Explanation:
Explanation
When you archive data chain objects, you need to follow a specific order based on their dependencies. The order that you archive data chain objects is: node type, hierarchy set, node set, viewpoint. You need to archive node types first, because they are independent of other data chain objects. Then you need to archive hierarchy sets that use those node types. Then you need to archive node sets that use those hierarchy sets or node types.
Then you need to archive viewpoints that use those node sets or hierarchy sets. You cannot archive data chain objects in any other order or in any order, because this would cause errors or inconsistencies in your data chain. You cannot archive applications or dimensions directly, because they are not data chain objects.
References: Archiving and Unarchiving Data Chain Objects - Oracle Help Center
NEW QUESTION # 39
When you register an application, the system creates a default view that contains all your dimensions. However, there may be situations where the default view is not enough and you need to create an alternate view and viewpoints.
Which three are situations where you create an alternate view and viewpoints?
- A. You need to give users access to the default view so that they have access to only one dimension.
- B. You need to create a maintenance view with multiple viewpoints from different applications so you can maintain all your dimension information in one place.
- C. You need an alternate view to share, compare, and map information across multiple applications.
- D. You need to create a validation view with multiple viewpoints from different dimensions so you can maintain all your application information in one place.
- E. You need to create a view to give users access to a limited set of data.
Answer: C,D,E
Explanation:
1. You need to create a validation view with multiple viewpoints from different dimensions so you can maintain all your application information in one place: This option is correct because a validation view is a type of view that allows you to create multiple viewpoints from different dimensions and validate them against each other. You can use a validation view to maintain all your application information in one place and check for any errors or inconsistencies.
2. You need to create a view to give users access to a limited set of data: This option is correct because a view is a type of data chain object that defines the scope of data that users can access and work with. You can create a view to give users access to a limited set of data by specifying the node sets and hierarchy sets that are included in the view.
3. You need an alternate view to share, compare, and map information across multiple applications: This option is correct because an alternate view is a type of view that allows you to create multiple viewpoints from different applications and share, compare, and map information across them. You can use an alternate view to synchronize and govern data across registered applications.
Reference:
https://docs.oracle.com/en/cloud/saas/enterprise-data-management-cloud/edmra/working-with-views.html
NEW QUESTION # 40
What conditions should be met to enable a custom validation?
- A. A valid expression and a failure message are defined, at least one trigger action and/or a trigger property is configured.
- B. A trigger property and a trigger action for a node set or hierarchy set is configured.
- C. A derived property of the Custom Validation node type that returns a Boolean value is defined.
- D. An expression that returns a Boolean value and a failure message are defined.
Answer: A
Explanation:
Explanation
A custom validation is a validation that checks whether nodes meet certain criteria based on their actions or properties using an expression that returns a Boolean value. To enable a custom validation, you need to meet the following conditions: define a valid expression and a failure message for the custom validation; configure at least one trigger action and/or a trigger property for a node set or hierarchy set that uses the custom validation. You do not need to define a derived property of the Custom Validation node type or an expression that returns a Boolean value and a failure message, because these are not supported by Oracle Enterprise Data Management Cloud. References: Working with Custom Validations - Oracle Help Center
NEW QUESTION # 41
......
Oracle 1z0-1086-22 certification exam is intended for professionals who have practical experience with Oracle Enterprise Data Management Cloud and are looking to validate their skills and knowledge. 1z0-1086-22 exam is also suitable for individuals who are interested in pursuing a career in Oracle Enterprise Data Management Cloud implementation and administration.
Latest 100% Passing Guarantee - Brilliant 1z0-1086-22 Exam Questions PDF: https://lead2pass.prep4sureexam.com/1z0-1086-22-dumps-torrent.html