PASS HPE7-A01 exam with HP Real Exam Questions - 100% Valid!
Actual HPE7-A01 Exam Recently Updated Questions with Free Demo
The Aruba Certified Campus Access Professional certification is a well-recognized certificate in the IT industry that offers several benefits to certified professionals. Certified professionals are more likely to be sought after by companies who have or are planning to have, an Aruba-based network infrastructure. Aruba Certified Campus Access Professional Exam certification offers the benefit of standing out in a crowded job market and provides credibility for professionals in their field. For candidates who want to increase their earning potential or advance their careers, this certification can be a significant step forward.
NEW QUESTION # 26
You must ensure the HPEAruba network you are configuring for a client is capable of plug-and-play provisioning of access points. What enables this capability?
- A. SRTP
- B. LLDP-MED
- C. UCC Service
- D. CSMA
Answer: C
Explanation:
The capability that enables plug-and-play provisioning of access points in an HPE Aruba network is the UCC Service. The UCC Service is a cloud-based service that allows the access points to automatically discover and connect to the Aruba Central management platform without any manual intervention. The UCC Service also provides zero-touch configuration, firmware updates, and monitoring for the access points1.
The other options are incorrect because:
B) LLDP-MED: LLDP-MED is a protocol that enhances the interoperability between network devices and IP phones. It does not enable plug-and-play provisioning of access points2.
C) SRTP: SRTP is a protocol that provides encryption and authentication for voice and video traffic. It does not enable plug-and-play provisioning of access points3.
D) CSMA: CSMA is a protocol that regulates how devices share a common medium, such as a wireless channel. It does not enable plug-and-play provisioning of access points.
NEW QUESTION # 27
You are doing tests in your lab and with the following equipment specifications
* AP1 has a radio that generates a 10 dBm signal
* AP2 has a radio that generates a 11 dBm signal
* AP1 has an antenna with a gain of 9 dBi
* AP2 has an antenna with a gain of 12 dBi.
* The antenna cable for AP1 has a 2 dB loss
* The antenna cable for AP2 has a 3 dB loss
What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for APT?
- A. 17 dBm
- B. -12 dBm
- C. 26 dBm
- D. 30 dBm
Answer: A
Explanation:
EIRP = Transmitter power + Antenna gain - Cable loss
EIRP for AP1 = 10 dBm + 9 dBi - 2 dB = 17 dBm
NEW QUESTION # 28
You are deploying Aruba CX 6300's with the customers requirement to only allow one (1) VoIP phone and one (1) device.
The following local role gets assigned to the phone port-access rote VoIP device-traffic-class voice What set of commands best fits this requirement?
- A. interface 1/1/1
aaa authentication port-access client-limit multi-domain 2
aaa authentication port-access auth-mode multi-domain - B. interface 1/1/1
aaa authentication port-access client-limit 2
aaa authentication port-access auth-mode client-mode - C. interface 1/1/1
aaa authentication port-access auth-mode multi-domain - D. interface 1/1/1
aaa authentication port-access client-limit 1
aaa authentication port-access auth-mode device-mode
Answer: A
Explanation:
Aruba CX 6300 switches support various features to control the port access for different types of devices, such as client mode, device mode, and multidomain mode. These features can help limit the number of clients that can connect to a port and prevent unauthorized devices from accessing the network.
This is because option C shows how to configure the client limit and the auth-mode for a specific port using the interface command and the aaa authentication port-access command. The client limit specifies the maximum number of clients that can connect to a port. The auth-mode specifies the authentication mode for the port. In this case, option C sets both parameters to multi-domain mode, which allows only one voice device and one data device to be authenticated on a port.
NEW QUESTION # 29
Which statement best describes QoS?
- A. Identifying the quality of the connection
- B. Determining which traffic passes specified quality metrics
- C. Identifying specific traffic for special treatment
- D. Scoring traffic based on the quality of the contents
Answer: C
Explanation:
QoS stands for Quality of Service and is a mechanism that allows network devices to prioritize and differentiate traffic based on certain criteria, such as application type, source, destination, etc.
QoS involves identifying specific traffic for special treatment and applying policies and actions to improve its performance or meet certain service level agreements (SLAs). QoS can help network devices to manage congestion, delay, jitter, packet loss, bandwidth allocation, etc., for different types of traffic. QoS can be implemented at various layers of the network stack and across different network domains.
NEW QUESTION # 30
Select the Aruba stacking technology matching each option (Options may be used more than once or not at all.)
Answer:
Explanation:
Explanation
a) Support up to 10 devices per stack -> VSF
b) Support two devices per stack -> VSX
c) Individual ISL links up to 400G are supported -> VSX
d) individual ISL links up to 50G are supported -> VSF
e) A maximum aggregate ISL bandwidth of 200G is supported -> VSF
References: 1
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/GUID-2E425DAE-EC54-4313-9D
NEW QUESTION # 31
With the Aruba CX switch configuration, what is the Active Gateway feature that is used for and is unique to VSX configuration?
- A. copied over the ISL link for an optimized path.
- B. Sixteen different VMACs are supported total as shared.
- C. Active Gateway can once MSTP instances are created for VLAN load sharing.
- D. Sixteen different VMACS are supported for each IPV4 and IPV6 stack simultaneously
Answer: D
Explanation:
The active gateway feature is used to provide active-active layer 3 default gateway for hosts on the same subnet. It allows the switch to convert multicast streams into unicast streams over the wireless link, which improves the quality and reliability of streaming video, while preserving the bandwidth available to the non-video clients. The active gateway feature is unique to VSX configuration because it eliminates the need for VRRP and avoids traffic being pushed over the ISL link, which can cause latency in the network.
NEW QUESTION # 32
Which component is used by the Aruba Network Analytics Engine (NAE)?
- A. Current State Database
- B. Lisp-based agents
- C. JSON-based scripts
- D. Ruby-based scripts
Answer: A
Explanation:
Explanation
The component that is used by the Aruba Network Analytics Engine (NAE) is D. Current State Database.
The Current State Database is a database that stores the configuration and state information of the switch, such as interfaces, VLANs, routing protocols, statistics, and more. The NAE can access this database through the AOS-CX REST API and monitor the values of any data point using monitors. The NAE can also track the history of the values in a time-series database and correlate them with network events or configuration changes1. The Current State Database provides NAE with direct visibility into the entire current state of the device, which enables intelligent troubleshooting and automation of network tasks1.
The other options are incorrect because:
A: JSON-based scripts: JSON is a data format that is used to exchange information between applications. It is not a scripting language that can be used by NAE. NAE scripts are written in Python, which is a popular and powerful programming language1.
B: Lisp-based agents: Lisp is a family of programming languages that are mainly used for artificial intelligence and functional programming. It is not a language that can be used by NAE. NAE agents are instances of scripts that run on the switch and collect relevant network information and trigger alerts or actions1.
C: Ruby-based scripts: Ruby is a general-purpose programming language that is known for its expressiveness and elegance. It is not a language that can be used by NAE. NAE scripts are written in Python, which is a popular and powerful programming language1.
NEW QUESTION # 33
Which statement best describes QoS?
- A. Identifying the quality of the connection
- B. Determining which traffic passes specified quality metrics
- C. Identifying specific traffic for special treatment
- D. Scoring traffic based on the quality of the contents
Answer: B
Explanation:
QoS stands for Quality of Service and is a mechanism that allows network devices to prioritize and differentiate traffic based on certain criteria, such as application type, source, destination, etc3. QoS involves identifying specific traffic for special treatment and applying policies and actions to improve its performance or meet certain service level agreements (SLAs)3. QoS can help network devices to manage congestion, delay, jitter, packet loss, bandwidth allocation, etc., for different types of traffic3. QoS can be implemented at various layers of the network stack and across different network domains. Reference: 3 https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/qos/configuration/15-mt/qos-15-mt-book/qos-overview.html
NEW QUESTION # 34
When configuring UBT on a switch what will happen when a gateway role is not specified?
- A. The switch will put the client on the access VLAN
- B. The gateway will send back the deny role to the client.
- C. The gateway will assign a default role to the client
- D. The switch will assign the default deny role to the client.
Answer: D
Explanation:
According to the Aruba Documentation Portal1, user-based tunneling (UBT) is a feature that uses GRE to tunnel ingress traffic on a switch interface to a gateway for further processing. UBT enables a switch to provide a centralized security policy, using per-user authentication and access control to ensure consistent access and permissions.
Option A: The switch will put the client on the access VLAN
This is because option A shows how UBT works on an Aruba switch. When a device connects to the network, it is authenticated using either MAC Authentication or 802.1X and triggers an enforcement policy from ClearPass, which contains an enforcement profile with a user role configuration. The user role can be assigned locally on the switch or on ClearPass as part of an enforcement profile. The user role determines the VLAN that the device belongs to and the access policies that apply to it23.
Therefore, option A is correct.
1: https://www.arubanetworks.com/techdocs/central/latest/content/nms/aos-cx/cfg/conf-cx-ubt.htm
2: https://www.arubanetworks.com/techdocs/AOS-CX/10.06/HTML/5200-7696/GUID-581D2976-694B-
46C7-849
https://community.arubanetworks.com/viewdocument/?DocumentKey=c740df4e-3e26-4cc5-9126-
355a18709c4
NEW QUESTION # 35
Your Aruba CX 6300 VSF stack has OSPF adjacency over SVI 10 with LAG 1 to a neighboring device The following configuration was created on the switch:
- A.
- B.
- C.
- D.
Answer: A
Explanation:
Explanation
OSPF (Open Shortest Path First) is a routing protocol that uses link-state information to calculate the best path to each destination in the network. OSPF establishes adjacencies with neighboring routers to exchange routing information and maintain a consistent view of the network topology1.
To establish an OSPF adjacency, the routers need to have some common parameters, such as the area ID, the network type, the hello interval, the dead interval, and the authentication method2. The routers also need to have a matching subnet mask on the interface that connects them3.
In this case, the Aruba CX 6300 VSF stack has an SVI (Switched Virtual Interface) on VLAN 10 with an IP address of 10.1.1.1/24 and a LAG (Link Aggregation Group) on port 1/1/1 and port 2/1/1 that connects to a neighboring device. The SVI is configured with OSPF area 0 and network type broadcast. The LAG is configured with OSPF passive mode, which means that it will not send or receive OSPF hello packets.
The neighboring device has an interface with an IP address of 10.1.1.2/24 and a LAG on port 1/0/1 and port
2/0/1 that connects to the Aruba CX 6300 VSF stack. The interface is configured with OSPF area 0 and network type broadcast.
Since the Aruba CX 6300 VSF stack and the neighboring device have the same area ID, network type, subnet mask, and default hello and dead intervals on their interfaces, they will be able to establish an OSPF adjacency over SVI 10 with LAG 1. The OSPF passive mode on the LAG will not affect the adjacency, because it only applies to the LAG interface, not the SVI interface.
NEW QUESTION # 36
A customer is using a legacy application that communicates at layer-2. The customer would like to keep this application working to a remote site connected via layer-3 All legacy devices are connected to a dedicated Aruba CX 6200 switch at each site.
What technology on the Aruba CX 6200 could be used to meet this requirement?
- A. Static VXLAN
- B. Generic Routing Encapsulation (GRE)
- C. Inclusive Multicast Ethernet Tag (IMET)
- D. Ethernet over IP (EolP)
Answer: C
Explanation:
VXLAN is a technology that can be used to meet the requirement of using a legacy application that communicates at layer-2 across a layer-3 network. Static VXLAN is a feature that allows the creation of layer-2 overlay networks over a layer-3 underlay network using VXLAN tunnels. Static VXLAN does not require any control plane protocol or VTEP discovery mechanism, and can be configured manually on the Aruba CX 6200 switches. The other options are incorrect because they either do not support layer-2 communication over layer-3 network or are not supported by Aruba CX 6200 switches. References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch03.htmlhttps://www.aruba
NEW QUESTION # 37
List the firewall role derivation flow in the correct order
Answer:
Explanation:
Explanation
According to the Aruba Documentation Portal1, the firewall role derivation flow in the correct order is:
* Server derived role
* User derived role
* Authentication default role
* Initiation role assigned
NEW QUESTION # 38
List the firewall role derivation flow in the correct order
Answer:
Explanation:
1 - Server derived role
2 - User derived role
3 - Authentication default role
4 - Initiation role assigned
NEW QUESTION # 39
Describe the difference between Class of Service (CoS) and Differentiated Services Code Point (DSCP).
- A. CoS has much finer granularity than DSCP
- B. They are similar and can be used interchangeably.
- C. CoS is only contained in VLAN Tag fields DSCP is in the IP Header and preserved throughout the IP packet flow
- D. CoS is only used to determine CLASS of traffic DSCP is only used to differentiate between different Classes.
Answer: C
Explanation:
CoS and DSCP are both methods of marking packets for quality of service (QoS) purposes. QoS is a mechanism that allows network devices to prioritize and differentiate traffic based on certain criteria, such as application type, source, destination, etc. CoS stands for Class of Service and is a 3-bit field in the 802.1Q VLAN tag header. CoS can only be used on Ethernet frames that have a VLAN tag, and it can only be preserved within a single VLAN domain. DSCP stands for Differentiated Services Code Point and is a 6-bit field in the IP header. DSCP can be used on any IP packet, regardless of the underlying layer 2 technology, and it can be preserved throughout the IP packet flow, unless it is modified by intermediate devices.
NEW QUESTION # 40
You are building a configuration in Central that will be used for a standardized network design for small sites for your company, you want to use GUI configuration for gateways and Aps, while template configuration for switches. You need to align with Aruba best practices.
Which set of actions will satisfy these requirements?
- A. Create one group in Central for switches and a second group for APs and gateways. Create a unique site for each location, and assign devices to the appropriate site.
- B. Create one group in Central for switches a second group for APs. and a third group for gateways Create a unique site for each location, and assign devices to the appropriate site.
- C. Create a single group in Central. Create a unique site for each type of device, and assign devices to the appropriate site.
- D. Create a single group in Central. Create a unique site for each location, and assign devices to the appropriate site.
Answer: B
Explanation:
When configuring a standardized network design for small sites in Aruba Central, following Aruba's best practices typically involves grouping different types of devices and creating unique sites for each location. Since you want to use GUI configuration for gateways and APs while using template configuration for switches, it means you need to manage these device types separately.
This approach allows you to manage devices grouped by device type, while providing customized configurations for each site. Creating separate groups helps better manage device configurations and policies, especially when using different methods of configuration (GUI and template).
NEW QUESTION # 41
Your Director of Security asks you to assign AOS-CX switch management roles to new employees based on their specific job requirements. After the configuration was complete, it was noted that a user assigned with the auditors role did not have the appropriate level of access on the switch.
The user was not allowed to perform firmware upgrades and a privilege level of 15 was not assigned to their role.
Which default management role should have been assigned for the user?
- A. config
- B. sysadmin
- C. administrators
- D. sysops
Answer: C
Explanation:
In AOS-CX switches, when assigning management roles to users that need to perform firmware upgrades and require a privilege level of 15, the role with the highest privileges should be chosen.
The "administrators" role typically provides full management access, including the ability to perform firmware upgrades and configure the switch. This role is suitable for users who need to perform advanced management and configuration tasks.
Other roles such as "sysadmin", "sysops", and "config" may provide certain levels of access but may not necessarily include the ability to perform firmware upgrades or have privilege level 15.
NEW QUESTION # 42
you are implementing ClearPass Policy Manager with EAP-TLS for authenticating all corporate-owned devices.
What are two possible solutions to the problem of deploying client certificates to corporate MacBooks that are joined to a Windows domain? (Select two.)
- A. ClearPass OnGuard
- B. Apple Configurator and a GPO
- C. ClearPass OnBoard
- D. Mobile Device Manager
- E. Windows Server PKl and a GPO
Answer: B,E
Explanation:
The reason is that ClearPass OnBoard is a tool that allows you to enroll Mac computers into a ClearPass Policy Manager site using an Apple MDM push certificate. This certificate can be obtained from Apple or from a third-party PKI provider.
Apple Configurator is a tool that allows you to configure and deploy Mac computers using a GPO. This tool can also be used to enroll Mac computers into a ClearPass Policy Manager site using an Apple MDM push certificate.
NEW QUESTION # 43
......
HPE7-A01 certification exam is an online, proctored exam that consists of 60 multiple-choice questions. Candidates will have 90 minutes to complete the exam, and the passing score is 70%. HPE7-A01 exam fee is $200, and it can be taken at any time from any location. Candidates who pass the exam will receive the Aruba Certified Campus Access Professional (ACCP) certification, which is valid for three years.
HP HPE7-A01 exam is designed to validate the skills and knowledge of IT professionals who are responsible for designing and implementing Aruba wireless LAN solutions for enterprise-level networks. Aruba Certified Campus Access Professional Exam certification is specifically designed for individuals who are looking to establish themselves as Aruba Certified Campus Access Professionals.
HPE7-A01 Free Sample Questions to Practice One Year Update: https://lead2pass.prep4sureexam.com/HPE7-A01-dumps-torrent.html