[Nov 13, 2025] Updates Up to 365 days On Valid D-PST-DY-23 Braindumps
Best QualityD-PST-DY-23 Exam Questions EMC Test To Gain Brilliante Result
NEW QUESTION # 74
Which role is responsible for managing data protection and recovery operations in PowerStore?
- A. Network administrator
- B. Security analyst
- C. Storage administrator
- D. System architect
Answer: C
NEW QUESTION # 75
The wan connection between the production and DR sites has a low latency of <5 milliseconds.
Which firewall port is used by PowerStore to communicate between sites?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 76
How many volumes can be created at a time using the PowerStore Manager?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 77
When adding an appliance to a cluster, what is the minimum number of additional IP addresses needed to configure the management network?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 78
Refer to the exhibit.
An administrator is about to replace a fan in their PowerStore appliance. They notice that the LED indicated by the blue arrow is solid white.
What does this LED status signify?
- A. Electric shock warning
- B. Unsafe to remove node
- C. Embedded I/O module is faulty
- D. Safe to remove node
Answer: B
NEW QUESTION # 79
What is the final step in the PowerStore migration process?
- A. Cleaning the source servers
- B. Sending migration logs to support
- C. Decommissioning the source storage
- D. Allocating more CPU resources
Answer: C
NEW QUESTION # 80
What does the data import session Pause operation do?
- A. Deactivates the host to PowerStore data path
- B. Stops the source to PowerStore cutover operation
- C. Deactivates the host to PowerStore control path
- D. Stops the source to PowerStore background copy operation
Answer: D
NEW QUESTION # 81
Place the steps in the correct order to map a PowerStore volume to a NVMe host.
Answer:
Explanation:
1 - add NVMe over TCP Sofware Adapter
2 - Add Host
3 - Add Controller
4 - Add NVMe volume
NEW QUESTION # 82
What are the minimum number of IP addresses required for the storage networking implementation for the PowerStore T appliance?
- A. 3 IP addresses, 2 IP for Node A, 1 IP for node B
- B. 5 IP addresses, 2 IP for Node A, 2 IP for node B, 1 IP for Global Discovery
- C. 2 IP addresses, 1 IP for Node A, 1 IP for node B
- D. 3 IP addresses, 2 IP for Node A, 1 IP for Global Discovery
Answer: C
NEW QUESTION # 83
Place the steps in the correct order to map a PowerStore volume to a NVMe host.
Answer:
Explanation:
Explanation:
NEW QUESTION # 84
A PowerStore T administrator discovers that only one port on each node is active and passing traffic. The other port is healthy and online, but total bandwidth is only half of what the customer expects.
Which two actions could resolve the issue? (Choose two.)
- A. Configure RSTP
- B. Configure Dynamic LAG
- C. Configure VLT
- D. Configure LACP
Answer: B,D
NEW QUESTION # 85
Which IP network range does the PowerStore Discovery Network use?
- A. 192.168.1.200/24
- B. 128.221.0.0/16
- C. 169.254.0.0/16
- D. 128.221.1.249/25
Answer: C
NEW QUESTION # 86
How is the content of a replication target volume verified?
- A. Create a Snapshot rule and protection policy and map the snapshot to a server
- B. Create a mountpoint of the target volume to a secondary server
- C. Map the destination volume to a server to achieve read-only access
- D. Map the destination volume to a server to achieve read/write access
Answer: C
NEW QUESTION # 87
An administrator is trying to set a performance policy while creating a Thin Clone of a volume group.
Why is the option to set performance policy unavailable?
- A. Thin Clones cannot be created using a volume group
- B. No Volumes are added in the volume group
- C. Volumes in the volume group are not mapped to any hosts
- D. Performance policy can only be set on a Thin Clone volume
Answer: D
NEW QUESTION # 88
SIMULATION
A storage admin is setting up a new protection policy with only snapshot rule for a new file system in PowerStore.
The administrator is given the below parameters.
- File system name: FS-1 on SMB-NAS Server.
- Size: 5TB
- New protection policy: Policy-1
- Snapshot rule: Snap-Rule only for Tuesdays on Hourly basis with default retention.
Use the simulator to perform the configuration task.
When you have finished continue to the next question.
Answer:
Explanation:
1. Create the File System
Navigate to Storage > File Systems.
Click Add File System.
Enter the file system name: FS-1
Set the file system size to 5 TB.
Select the appropriate NAS Server (SMB-NAS Server in this case).
Click Add.
2. Create the Protection Policy
Navigate to Protection > Protection Policies.
Click Add Protection Policy.
Enter the policy name: Policy-1
Click Next.
3. Configure the Snapshot Rule
In the "Snapshot Rules" section, click Add Rule.
Enter a name for the rule (e.g., "Snap-Rule").
Set the Days to Tuesday.
Set the Every field to 1 Hour.
Ensure that Retention is set to the default value.
Click Add.
Click Next.
4. Review and Finish
Review the protection policy summary.
Click Finish.
5. Apply the Protection Policy to the File System Navigate back to Storage > File Systems. Locate the FS-1 file system.
Click the More Actions button (three vertical dots) and select Edit.
In the "Protection Policy" field, select the newly created Policy-1 from the dropdown list. Click Save.
Verification
To verify the configuration, go to Protection > Protection Policies. Select Policy-1.
You should see the configured snapshot rule ("Snap-Rule") with the specified settings. Key Considerations Default Retention: The default retention for snapshots in PowerStore will vary depending on your system configuration. Ensure that the default retention meets your data protection needs.
Snapshot Schedule: The snapshot rule you created will take hourly snapshots of the file system every Tuesday.
By following these steps, you'll successfully create the protection policy with the specified snapshot rule and apply it to the new file system, meeting all the requirements of the simulation task.
NEW QUESTION # 89
Which versions of file sharing protocols are available for the Unix/Linux clients during NAS Server creation?
- A. NFSv3, NFSv4
- B. NFSv4, Secure NFS
- C. NFSv3, SFTP
- D. NFSv3, Secure NFS
Answer: A
NEW QUESTION # 90
Which storage protocol is commonly used for block-level access in PowerStore environments?
- A. iSCSI (Internet Small Computer System Interface)
- B. HTTP (Hypertext Transfer Protocol)
- C. SMB (Server Message Block)
- D. NFS (Network File System)
Answer: A
NEW QUESTION # 91
What is the role of the migration source in the PowerStore migration process?
- A. It holds the data to be migrated.
- B. It defines the network settings.
- C. It configures the target applications.
- D. It provides the destination storage.
Answer: A
NEW QUESTION # 92
A storage administrator has provisioned 10 x 2GB volumes. 400MB of data is written to each of the ten volumes.
What is the Thin Savings ratio for this configuration?
- A. 3:1
- B. 4:1
- C. 5:1
- D. 6:1
Answer: D
NEW QUESTION # 93
When a Volume is selected for the intercluster migration, what other data services associated with the volume will also be moved with it?
- A. Thin Clones and snapshots
- B. Thin Clones and File systems
- C. NAS Servers and File.systems
- D. Replications and Volume Groups
Answer: A
NEW QUESTION # 94
SIMULATION
Use the simulator to create a new 100 GB volume. Use a category of Other. Associate the new volume with a protection policy that includes a rule that takes a snapshot every hour Monday-Friday and retains it for 5 days.
When you have finished continue to the next question.
Answer:
Explanation:
See explanation below
Explanation:
1. Create the Volume
Navigate to Storage > Volumes.
Click + CREATE.
Enter a name for the volume (e.g., "MyVolume").
Set the volume size to 100 GB.
In the "Category" dropdown, select Other.
Click Add.
2. Create the Protection Policy
Navigate to Protection > Protection Policies.
Click Add Protection Policy.
Enter a name for the policy (e.g., "HourlySnapshots").
Click Next.
3. Configure the Snapshot Rule
In the "Snapshot Rules" section, click Add Rule.
Enter a name for the rule (e.g., "HourlyRule").
Set the Days to Monday through Friday.
Set the Every field to 1 Hour.
Set Retain to 5 Days.
Click Add.
Click Next.
4. Review and Finish
Review the protection policy summary.
Click Finish.
5. Associate the Protection Policy with the Volume
Navigate back to Storage > Volumes.
Locate the 100 GB volume you created.
Click the More Actions button (three vertical dots) and select Edit.
In the "Protection Policy" field, select the newly created HourlySnapshots policy from the dropdown list.
Click Save.
Verification
To verify the configuration, go to Protection > Protection Policies.
Select the HourlySnapshots policy.
You should see the configured snapshot rule ("HourlyRule") with the specified settings.
Key Considerations
Snapshot Frequency: The snapshot rule you created will take hourly snapshots of the volume every weekday (Monday to Friday).
Retention Period: The snapshots will be retained for 5 days before being automatically deleted.
Storage Space: Snapshots consume storage space. Ensure you have enough free space to accommodate the snapshots taken based on the frequency and retention period.
By following these steps, you'll successfully create a 100 GB volume, configure a protection policy with the specified snapshot rule, and associate the policy with the volume, fulfilling the requirements of the simulation task.
NEW QUESTION # 95
What is the role of a storage administrator in PowerStore administration?
- A. Configuring host applications
- B. Monitoring power consumption
- C. Managing network switches
- D. Overseeing storage infrastructure and operations
Answer: D
NEW QUESTION # 96
......
Focus on D-PST-DY-23 All-in-One Exam Guide For Quick Preparation: https://lead2pass.prep4sureexam.com/D-PST-DY-23-dumps-torrent.html