Latest [Jan 14, 2022] 300-430 Exam with Accurate Implementing Cisco Enterprise Wireless Networks PDF Questions
Take a Leap Forward in Your Career by Earning Cisco 143 Questions
Topics of Cisco 300-430 Exam
The Cisco 300-430 exam evaluates the competence of the candidates in implementing the wireless network. The subject areas that are measured in the delivery of this test include QoS, FlexConnect, Multicast, monitoring, advanced location services, as well as device hardening & client connectivity security. The details of these topics are enumerated below:
FlexConnect
This domain makes up about 15% of the exam content and measures the proficiency of the students in specific areas. They will be required to demonstrate their skills in the following tasks:
- Implementing Office Extend.
- Deploying the components of FlexConnect, including switching & operating modes;
- Deploying the capabilities of FlexConnect, such as FlexConnect groups & roaming, Smart AP image upgrade, split-tunnel and fault tolerance, and Flex ACL & VLAN-based central switching;
Obtaining the CCNP Enterprise certification proves that the professionals have the expertise in enterprise networking solutions. To earn this certificate, the applicants are required to pass two exams. One of them covers core enterprise technologies, while the second is a concentration test (there are six exams of this category for this path) of your choice. Cisco 300-430 will evaluate your skills and knowledge of the implementation of the wireless network. Completing this test allows you to get the Cisco Certified Specialist – Enterprise Wireless Implementation certification, in addition to CCNP Enterprise.
NEW QUESTION 30
CMX Facebook Wi-Fi allows access to the network before authentication. Which two elements are available?
(Choose two.)
- A. Allow HTTP traffic only before authentication and block all the traffic.
- B. Allow HTTPs traffic only before authentication and block all other traffic.
- C. Allow all the traffic before authentication and intercept HTTPS only.
- D. Allow SNMP traffic only before authentication and block all the traffic.
- E. Allow all the traffic before authentication and intercept HTTP only.
Answer: B,E
Explanation:
NEW QUESTION 31
A corporation has recently implemented a BYOD policy at their HQ. Which two risks should the security director be concerned about? (Choose two.)
- A. malware
- B. keyloggers
- C. unauthorized users
- D. network analyzers
- E. lost and stolen devices
Answer: A,E
Explanation:
Explanation
https://ccbtechnology.com/byod-5-biggest-security-risks/
https://blogs.cisco.com/security/byod-many-call-it-bring-your-own-malware-byom
NEW QUESTION 32
An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)
- A. Static WEP + 802.1X
- B. Static WEP
- C. 802.1X
- D. WPA+WPA2
- E. CKIP
Answer: B,D
Explanation:
NEW QUESTION 33
Which three properties are used for client profiling of wireless clients? (Choose three.)
- A. DHCP
- B. MAC OUI
- C. hostname
- D. OS version
- E. HTTP user agent
- F. IP address
Answer: A,B,E
Explanation:
NEW QUESTION 34
An engineer must implement intrusion protection the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult. Which Ap mode and submode must be implemented?
- A. Ap mode: monitor, Ap submode: WIPS
- B. Ap mode: local, Ap submode: WIPS
- C. Ap mode: monitor, Ap submode: none
- D. Ap mode: local, Ap submode: none
Answer: B
Explanation:
NEW QUESTION 35
Which two events are outcomes of a successful RF jamming attack? (Choose two.)
- A. unauthentication association
- B. disruption of WLAN services
- C. deauthentication broadcast
- D. physical damage to AP hardware
- E. deauthentication multicast
Answer: B,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/mse/3350/72/wIPS_Configuration/Guide/wIPS_72/msecg_appA
NEW QUESTION 36
Refer to the exhibit.
Which two items must be supported on the VoWLAN phones to take full advantage of this WLAN configuration? (Choose two.)
- A. TSPEC
- B. SIFS
- C. WMM
- D. 802.11e
- E. APSD
Answer: C,D
Explanation:
NEW QUESTION 37
Refer to the exhibit.
An engineer tries to manage the rogues on the Cisco WLC. Based on the configuration, which AP is marked as malicious by the controller?
- A. rogue AP with SSID admin seen for 3000 seconds and heard at -60 dBm
- B. rogue AP with SSlD admin seen for 4000 seconds and heard at -60 dBm
- C. rogue AP with SSID admin seen for 3000 seconds and heard at -70 dBm
- D. rogue AP with SSlD admin seen for 4000 seconds and heard at -70 dBm
Answer: D
Explanation:
NEW QUESTION 38
Which two critical requirements must be addressed in the RF site survey for wireless video surveillance?
(Choose two.)
- A. jitter
- B. packet loss
- C. channel selection
- D. WLC configuration
- E. bandwidth
Answer: A,B
NEW QUESTION 39
What is the maximum time range that can be viewed on the Cisco DNA Center issues and alarms page?
- A. 7 days
- B. 24 hours
- C. 3 days
- D. 3 hours
Answer: A
Explanation:
(7 Days is the max, you can select)
NEW QUESTION 40
A customer has a distributed wireless deployment model where the WLCs are located in the data centers.
Because the file servers are located in the data center, the traffic from the corporate WLAN
"Corp-401266017" must go through the controllers, where the guest WLAN "Guest-19283746" traffic must use the local Internet line installed in each office. Which configuration will accomplish this task?
- A. Disable Local Switching for the corporate and guest WLAN.
- B. Disable Local Switching for the corporate WLAN and enable it for the guest WLAN.
- C. Enable Local Switching for the corporate WLAN and disable it for the guest WLAN.
- D. Enable Local Switching for the corporate and guest WLAN.
Answer: C
NEW QUESTION 41
A corporation has a wireless network where all access points are configured in FlexConnect. The WLC has a Data WLAN and a VoWiFi WLAN implemented where centrally-switched is configured for the APs. Which QoS configuration must be implemented for the wireless packets to maintain the marking across the wired and wireless network?
- A. Trust DSCP
- B. Set QoS to Platinum
- C. Enable CAC
- D. Allow WMM
Answer: D
Explanation:
Explanation
Text Description automatically generated with medium confidence
NEW QUESTION 42
An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network. Which element do you configure in a rule?
- A. rate-limit
- B. WMM required
- C. mark
- D. permit-ACL
Answer: C
Explanation:
NEW QUESTION 43
A Cisco CMX 3375 appliance on the 10.6.1 version code counts duplicate client entries, which creates wrong location analytics. The issue is primarily from iOS clients with the private MAC address feature enabled.
Enabling this feature requires an upgrade of the Cisco CMX 3375 appliance in a high availability pair to version 10.6.3. SCP transfers the Cisco CMX image, but the upgrade script run fails. Which configuration change resolves this issue?
- A. Run root patch to first upgrade to version 10.6.2 and then migrate to version 10.6.3.
- B. Break the high availability using the cmxha config disable command and upgrade the primary and secondary individuality.
- C. Upgrade the high availability pair to version 10.6.2 image first and then upgrade to version 10.6.3.
- D. Save configuration and use the upgrade script to upgrade the high availability pair without breaking the high availability.
Answer: B
NEW QUESTION 44
A customer wants to allow employees to easily onboard their personal devices to the wireless network. The visitors also must be able to connect to the same network without the need to engage with anyone from the reception desk. Which process must be configured on Cisco ISE to support this requirement?
- A. MAC authentication bypass
- B. native supplicant provisioning
- C. local web auth
- D. self-registration guest portal
Answer: D
NEW QUESTION 45
Which two statements about the requirements for a Cisco Hyperlocation deployment are true? (Choose two.)
- A. NTP can be configured, but that is not recommended.
- B. After enabling Cisco Hyperlocation on Cisco CMX, the APs and the wireless LAN controller must be restarted.
- C. The Cisco Hyperlocation feature must be enabled only on the wireless LAN controller.
- D. If the Cisco CMX server is a VM, a high-end VM is needed for Cisco Hyperlocation deployments.
- E. The Cisco Hyperlocation feature must be enabled on the wireless LAN controller and Cisco CMX.
Answer: D,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/products/collateral/wireless/mobility-services-engine/datasheet-c78-734648.html
NEW QUESTION 46
An engineer must implement intrusion protection the WLAN. The AP coverage is adequate and on-channel attacks are the primary concern. The building is historic, which makes adding APs difficult. Which Ap mode and submode must be implemented?
- A. Ap mode: monitor, Ap submode: WIPS
- B. Ap mode: local, Ap submode: WIPS
- C. Ap mode: monitor, Ap submode: none
- D. Ap mode: local, Ap submode: none
Answer: D
Explanation:
NEW QUESTION 47
The CTO of an organization wants to ensure that all Android devices are placed into a separate VLAN on their wireless network. However, the CTO does not want to deploy ISE. Which feature must be implemented on the Cisco WLC?
- A. RADIUS server overwrite interface
- B. AAA override
- C. custom AVC profile
- D. WLAN local policy
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/NativeProfiling75.html
NEW QUESTION 48
An engineer must deploy FlexConnect APs to a site that typically has 300 ms latency to the WLC. Which typical operating mode must the engineer plan on for normal operations?
- A. local authentication, local switching
- B. central authentication, central switching
- C. central authentication, local switching
- D. connected mode
Answer: A
Explanation:
Explanation/Reference:
References: http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-2/configuration/guide/cg/ cg_flexconnect.html
NEW QUESTION 49
An engineer is performing a Cisco Hyperlocation accuracy test and executes the cmxloc start command on Cisco CMX. Which two parameters are relevant? (Choose two.)
- A. WLC IP address
- B. X, Y real location
- C. AP name
- D. client description
- E. client MAC address
Answer: B,E
NEW QUESTION 50
A new MSE with wIPS service has been installed and no alarm information appears to be reaching the MSE from controllers. Which protocol must be allowed to reach the MSE from the controllers?
- A. NMSP
- B. SOAP/XML
- C. CAPWAP
- D. SNMP
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/MSE_wIPS/MSE_wIPS_7_6/MSE_wIPS_7_5_chapter NMSP (Network Mobility Services Protocol) - The protocol used for communication between Wireless LAN Controllers and the Mobility Services Engine. In the case of a wIPS Deployment, this protocol provides a pathway for alarm information to be aggregated from controllers to the MSE and for wIPS configuration information to be pushed to the controller. This protocol is encrypted.
https://www.cisco.com/c/en/us/td/docs/wireless/technology/wips/deployment/guide/WiPS_deployment_guide.ht
NEW QUESTION 51
......
Monitoring
This domain makes up about 15% of the whole content and evaluates the individuals’ understanding of the following processes:
- Utilizing reports on Cisco DNA Center and PI;
- Managing RF interferers;
- Managing rogues and alarms;
- Troubleshooting the client’s connectivity.
Authentic Best resources for 300-430 Online Practice Exam: https://lead2pass.prep4sureexam.com/300-430-dumps-torrent.html