API-580 PDF Dumps Real 2024 Recently Updated Questions
Released API API-580 Updated Questions PDF
Who should take the API-580 exam
The API Risk Based Inspection API-580 Exam certification is an internationally-recognized validation that identifies persons who earn it as possessing skilled as Risk Based Inspection Certification. If a candidate wants significant improvement in career growth needs enhanced knowledge, skills, and talents. The API Risk Based Inspection API-580 Exam certification provides proof of this advanced knowledge and skill. If a candidate has knowledge of associated technologies and skills that are required to pass API Risk Based Inspection API-580 Exam then he should take this exam.
How much API-580 Exam Cost
The price of the API-580 exam is $365 USD.
NEW QUESTION # 19
Qualitative consequence analysis of failure can be estimated separately for each unit, system, equipment group or individual equipment item.
- A. On the basis of available data
- B. On the basis of process and environmental conditions
- C. No basis required since it is qualitative
- D. On the basis of expert knowledge and experience
Answer: D
NEW QUESTION # 20
Provides a basis for risk evaluation, riskmitigation and risk acceptance
- A. Risk evaluation
- B. Risk identification
- C. Risk estimation
Answer: C
NEW QUESTION # 21
_______________in a safety context is a hazard.
- A. Source
- B. Toxic
Answer: A
NEW QUESTION # 22
The type of failure mode that likely to occur due to SSC
- A. Small holes to rupture
- B. Only rupture
- C. Small holes
- D. Cracks
Answer: D
NEW QUESTION # 23
Is key to performing deterioration mechanism identification
- A. Understanding equipment operation and process upsets
- B. Understanding equipmentoperation and its safetyprotective measures
- C. Understanding equipment operation and the interaction withthe chemical and mechanical environment
Answer: C
NEW QUESTION # 24
Results of quantitative consequence analysis are usually expressed in
- A. Ranges from high to low
- B. Occasion
- C. Numeric
- D. Frequency
Answer: C
NEW QUESTION # 25
_________ are the primary inputs into the probability of failure evaluation.
- A. Loss of containment f fluid
- B. Damage mechanisms and its severity
- C. The deterioration mechanisms, rates and susceptibilities
- D. Fluid toxicity and its concentration
Answer: C
NEW QUESTION # 26
Failure mode can primarily affects the
- A. Magnitude
- B. A&B
- C. Consequences
Answer: A
NEW QUESTION # 27
________________ is usually not the primary objective of a RBI assessment, but it is frequently a side effect of
optimization.
- A. Reducing inspection costs
- B. Increasing inspection costs
- C. Increasing frequency of inspection programs
Answer: A
NEW QUESTION # 28
Is a risk management activity that may lead to risk reduction?
- A. Inspection
- B. Analysis
- C. Evaluation
Answer: A
NEW QUESTION # 29
In general the probability of failure is determined by
- A. Consequence detailed
- B. Effectiveness of inspection program
- C. Deterioration mechanism
- D. A& B
Answer: C
NEW QUESTION # 30
RBI may include methodologies to assess the effectiveness of the management systems in maintaining
- A. Mechanical integrity
- B. Total asset integrity
- C. Plant integrity
Answer: A
NEW QUESTION # 31
Method used for consequence analysis should demonstrate the ability to provide
- A. Just an analysis
- B. No output is required
- C. The required level of discrimination between higher and lower consequence equipment items.
Answer: C
NEW QUESTION # 32
Following are some of the recognized risks which cannot be managed by inspection alone except one
- A. The suitability and current condition of the equipment within the current operating envelope will determine the probability of failure (pof) of the equipment from one or more deterioration mechanisms
- B. Consequence-dominated risks
- C. Equipment nearing retirement
- D. Failure mechanisms (such as brittle fracture, fatigue) where avoidance of failure primarily depends on operating within a defined pressure/temperature envelope
Answer: A
NEW QUESTION # 33
The reduction in the ability of a component to provide its intended purpose of containment of Fluids
- A. Damage
- B. Deterioration
- C. Thinning
- D. Degradation
Answer: B
NEW QUESTION # 34
The primary audience for rp 580 is
- A. Only materials engineering personnel
- B. Inspection and materials engineering personnel
- C. Only inspection personnel
- D. Maintenance personnel
Answer: C
NEW QUESTION # 35
Loss of containment is
- A. Loss of fluid to the external environment
- B. Container loss at the port authority
- C. B&C
- D. Risk related to containers
Answer: A
Explanation:
Explanation
NEW QUESTION # 36
________________ may result in the calculated corrosion rate appearing artificially high or low.
- A. At scanning
- B. Measurement error
- C. Clerical error
- D. Inspector error
Answer: B
NEW QUESTION # 37
The primary audience for RP 580 is
- A. Only materials engineering personnel
- B. Inspection and materials engineering personnel
- C. Only inspection personnel
- D. Maintenance personnel
Answer: C
Explanation:
Explanation
NEW QUESTION # 38
The programme that focused on maintaining the mechanical integrity of pressure equipment items and minimizing the risk of loss of containment due to deterioration
- A. RBI
- B. Hazop
- C. Rem
- D. PHA
Answer: A
NEW QUESTION # 39
......
API-580 Dumps and Practice Test (142 Exam Questions): https://lead2pass.prep4sureexam.com/API-580-dumps-torrent.html